PH: 866.476.9217
10
A complete vinyl wiring diagram with adhesive backing, showing the motor
circuit and the control circuit, is permanently attached inside the control box.
The diagram offers a convenient reference for connecting circuits or
troubleshooting electrical problems.
5.
PENDANT CONTROL
The Pendant Control is in a NEMA-4 (watertight) box and is operated by 2
momentary contact type pushbuttons. Wired to the Electrical Package with a
50ft cord, the Pendant Control allows the user to operate in both the clockwise
and counter-clockwise directions all while standing at a safe distance from the
railcar.
The Pendant Control is also equipped with a 2-position switch to energize and
de-energize
the
GO-E2’s
motor
6.
DRIVE TIP
The Drive Tip is secured to the Telescoping Drive Shaft (TDS) with a heavy-duty
set screw. The tapered end of the Drive Tip will firmly seat into the Railcar’s
Capstan Socket
REPLACEMENT DRIVE TIP PART # 33-10001
7.
TELESCOPING DRIVE SHAFT (TDS)
The TDS connects the Drive Tip to the Gear Motor. By extending and
compressing the TDS allows the
GO-E2
to accommodate traveling Capstan
Barrels. The U-Joint and Yoke design allows the Drive Tip to make full contact
with the Capstan Barrel at all angles.
Summary of Contents for GO-E2
