Product details
6 720 805 339 (2014/09)
4
2
Product details
2.1
Usage
These cylinders are designed to accept input from two heat sources, the
most common being a solar input supported by a controlled appliance
such as a gas or oil boiler. The maximum cylinder heat input must not
exceed the following values:
Where the combined heat input exceeds the maximum input stated,
precautions must be taken to limit the heating appliances to the
appropriate input (see installation instructions of the heating
appliance).
Correctly commissioned input reduces the cycling of the heating
appliance and reduces the cylinder heat-up time.
2.2
Intended use
▶ Only use the cylinder for heating domestic hot water.
Any other application will be considered incorrect use. No liability for
any losses resulting from such use is accepted.
2.3
Cylinder Equipment Specification
• 4x sensor pockets internal Ø = 20.4 mm
• Upper indirect coil for heating by the secondary heating appliance
• Lower indirect coil for heating using the primary heat source,
including solar input.
• All-round rigid insulation EPS (expanded polystyrene), free of CFC
and HCFC.
• Duplex stainless steel cylinder
• Immersion heater, 3 kW
Cylinder
Max. cylinder heat input
TC-150
31.9 kW
TC-180
TC-210
39.4 kW
TC-250
TC-300
Table 2
