LEMCOM EtherNet/IP™ - User manual
Network configuration
COVAL - LMEIP-UK-D-1155UM0067
16/42
The computer network settings have to be set according to those of the LEMCOM:
1) Click the Start button.
2) Select Control Panel.
3) Click the Network and Internet link.
4) Click the Network and Sharing Center link.
5) View your network connections; click the Change adapter settings link.
6) Right-click your local area connection.
7) From the drop-down list, select Properties.
8) Under "This connection uses the following items," select Internet Protocol Version 4
9) Click the Properties button
10) Fill in the window as shown here
11) Press OK button.
12) If not done yet, connect the LEMCOM to the
computer Ethernet port and to the power supply.
6.2
LEMCOM network settings
6.2.1
Using LEMCOM Manager
1. Launch LEMCOM Manager
2.
Select the “Configuration mode”, enter the password “coval” and click OK
3.
Select “EtherNet/IP”
4. Connect to the master module by selecting default IP 10.3.182.163 and click OK
5.
Click on the ‘setting wheel’ to access network settings screen
10 3 182 10
