FORM: PPS SERIES OWNERS MNUL
REV: 05-31-2012
APPR BY: MF
38
Lifting System (Incline)
The treadmills in the Bari Mill series are fitted with a lifting mechanism consisting of a
threaded spindle and pinion, with a maximum incline angle of 25%. The lifting system is
started by a DC gear motor, with the drive power being transferred to a set of pinions by
a chain and chain wheel. These pinions raise and lower the treadmill by means of the
threaded spindle, are fitted with rubber feet, and absorb a large proportion of the weight
of the treadmill and the body weight of the running during an incline run.
The feedback system consists of two parts: the potentiometer unit and the end
switches. Resolution is 0.1% / degrees. Precision is +/- 0.4% / degrees.
The feedback potentiometer tells the data monitor where the lifting system is. The
potentiometer makes 6 revolutions.
The end switches limit the distance covered by the lifting system and are constantly in
use. The data monitor recognizes when the treadmill has triggered the 0% end switch.
Summary of Contents for PPS 43
Page 26: ...FORM PPS SERIES OWNERS MNUL REV 05 31 2012 APPR BY MF 26 PPS Med 43 PPS Med 55 PPS Med 70...
Page 48: ...FORM PPS SERIES OWNERS MNUL REV 05 31 2012 APPR BY MF 48 WARRANTY INFORMATION Chapter 6...
Page 55: ...FORM PPS SERIES OWNERS MNUL REV 05 31 2012 APPR BY MF 55 966 3929 800 WOODWAY...
