Woods Batwing BW10.70E, Operator'S Manual

Page: 50 / 151

50 Parts
MAN1258 (3/26/2018)
SHRED KIT (OPTIONAL)
Installation Instructions
1. Install suppled shred kit blades as shown, using shims
to obtain no more than .25" movement at blade tip.
Stack shims.
2. Install baffle extensions 1045884 with supplied
hardware onto front wing baffles.
To Return Batwing to Brush Cutting
1. Remove baffles.
2. Remove one opposing set of blades and hardware
from each crossbar.
3. To protect unused hole for following season:
coat tab pin into hole and secure with screw 1031225.
4. For lower horsepower shredding, remove baffle
extensions. For extremely low horsepower shredding,
order 3 sets of flat double edge blade kits 19162KT.
REF PART QTY DESCRIPTION
1 3379 6 HHCS 1/2 NC X 1-1/2 GR5 ZP
2 10520 6 18GA 1-1/2 BLD PIN SHIM
3 13946 6 20 GA 1-1/2 BLD PIN SHIM
4 19160KT 4 BLADE KIT CCW
5 19161KT 2 BLADE KIT CW
6 24597 6 BOLT CRG 3/8 NC X 3/4
7 32603 6 KEYHOLE PLATE SPECIAL
8 32604 6 BLADE PIN LOCK CLIP SPEC
9 1028824 6 SPACER, 5/16 THK BLADE PIN
10 1031225 6 HFS .50NC X 1.25 GR5
11 1045034 6 PIN, BLADE, DRL, 2.39
12 1045628 6 NUT, HFN 3/8 NC, DRI-LOC PATCH
13 1045820 6 WA, PIN 1.50 X 1.13
14 1045885 2 LUG, SHRED BAFFLE
15 19162KT 3 BLD, .50 X 4 X 25 FLAT DOUBLE
EDGE BLADE KIT, OPTIONAL FOR
LOW HORSEPOWER SHREDDING