BA_WP_SPM2-1000_EN_28-22.docx
8
3
General
The WOODPECKER "SPM 2-1000" model is a universal spindle moulder with height and tilt adjustable milling
arbor, built-in milling spindle lock, two directions of rotation, adjustable speed and separately adjustable total
and partial fence.
Special highlights in the basic equipment are the sturdy and smooth-running format sliding table, the telescopic
fence with 2 flip stops and eccentric clamp, and the three supplementary table extensions.
•
The milling spindle is driven by a powerful 4.0 kW / 5.5 HP three-phase motor equipped with a wear-free,
electronic motor brake. An even more powerful motor with 5.5 KW / 7.5 HP is available as an option.
•
The machine's four fixed speeds (1400 / 3500 / 6000 / 8000 rpm) can be set by flipping the pulley via the
belt quick tensioning device.
•
The milling spindle can be tilted backwards from 90° to 45° via an analogue angle scale.
•
The height and tilt adjustment is carried out manually using the two handwheels at the front.
•
The milling arbor is designed for conventional and climb milling and has a built-in milling spindle lock, which
allows for quick and convenient tool changes.
•
The standard safety fence can be moved manually forwards and backwards by loosening the two clamping
screws. The fine adjustment of the total fence and the partial fence is done manually via adjusting wheels
with a scale for the total fence and a vernier scale for the partial fence.
•
The PANHANS Type 215 safety fence incl. cast fence plates and aluminium splitter tongues is available as an
option. The total fence is adjusted via the built-in handwheel (separate measuring device, e.g. setting gauge
or similar required). The partial fence is adjusted via a star knob using the vernier scale.
•
The large and solid table top with a 190 mm opening is made of a solid cast iron and measures 1000 x 550
mm. This can be extended with the two included table extensions (500 x 320 mm) on the left and right side.
•
The sturdy and smooth-running aluminium sliding table with hardened steel guide rods measures 1150 x
350 mm and is grooved so that the telescopic fence included as standard with two adjustable flip stops and
eccentric clamp can be attached to it. The sliding table can be extended with an attachable table extension
parallel to the telescopic fence.
•
The control panel on the front of the machine is equipped with a lockable main switch, an on/off switch for
the spindle, a direction of rotation switch and an emergency stop pushbutton. In addition, the currently set
speed is visualized here via four signal lamps.
•
The milling spindle can be secured against turning by a locking bolt for tool change. An internal safety switch
prevents the milling spindle from starting during this process.
•
The machine is supplied in a CE-compliant and GS-tested design.
