BA_WP_SPM2-1000_EN_28-22.docx
21
4.7
Optional Safety Equipment
4.7.1
Protective and Pressure Device GAMMA V 1629
The protective and pressure device type GAMMA V 1629 can be attached to all common safety fences and is
used instead of the standard protective and pressure device. It is infinitely adjustable horizontally and vertically
and locks in the raised position.
•
For details see section
4.7.2
Protective and Pressure Device CENTREX 1624
The fold-up protective and pressure device type CENTREX 1624 is used to securely fix workpieces during manual
milling operations. It can be attached to all common safety fences and is used instead of the standard protective
and pressure device. The special shape of the pressure shoes ensures precise workpiece guidance for all milling
work that occurs.
•
For details see section
4.7.3
Ring Fence TAPOA 1639
For accident-free milling of curved workpieces on the spindle moulder, with thrust ring and guard ring, 1 thrust
ring and guide bar, with fine adjustment of the milling depth, suction nozzle ø 120 mm.
•
For details see section
4.7.4
Ring Fence KOALA 1637
For accident-free milling of curved workpieces on the spindle moulder, with thrust ring and guard ring, 2 thrust
rings and guide bar, with fine adjustment of the milling depth, suction nozzle ø 120 mm.
•
For details see section
4.7.5
Power Feeder PV84
For a safe workpiece feed.
•
For details see section
4.7.6
Integral Fence Plates Type 211
Safety fence plates with integrated, swivelling guide rods that ensure a gap-free guide surface for all milling op-
erations. Exact adaptation to tool diameter and height by means of infinitely variable adjustment. The integral
fence plates are mounted in place of the standard fence plates and are available in four different length pairs
(infeed - outfeed side).
•
For details see section
