BA_WP_SPM2-1000_EN_28-22.docx
27
6.2.3
Lifting and Parking with an Overhead Crane
Figure 6: Lifting and parking with a crane
•
Prepare four lashing straps or transport ropes (C) with the re-
quired load capacity and in sufficient length and hang them on
the crane hook (
D
) as shown in
•
Then fasten the straps/ropes (
C
) in the four transport lugs (
E
) of
the machine and adjust them well. If necessary, move the crane
a little to ensure vertical and stable lifting. Do not tilt the ma-
chine!
Before lifting, check that the ropes are securely
fastened in the four transport lugs!
•
Lift the machine only so far that the pallet can be removed. Pro-
ceed carefully and without bumping / rocking.
•
Remove the screw fastenings and transport locks required for
transport on the pallet and fit the four feet supplied.
•
Then park the machine at the intended place of use.
6.3
Machine Installation
Remove the preservative that was applied at the factory to protect the parts against corrosion without painting.
This can be done with commercially available solvents. Please do not use nitro solvents or similar solvents and
never use water to remove the preservative!
Figure 7: Adjustable foot
•
Due to the solid machine construction, no special foundation
is required to ensure good levelling and vibration-free opera-
tion of the machine.
•
Remove all transport locks and fastening elements necessary
for transport.
•
For levelling, the machine has four feet (
F
) which can be ad-
justed in height by means of adjusting and lock nuts.
•
Use an open-end spanner to level out any unevenness in the
floor with a machine spirit level 0.1 mm/1 m via the adjusting
nuts until a stable and level stand is achieved. Then secure all
4 feet with the lock nuts.
Be aware of possible crushing hazards when placing the machine (from the pallet to the
floor) by means of a forklift truck or similar. Pay particular attention to your hands and
feet and wear safety shoes and protective gloves as a precaution.
Danger to life when using a forklift truck! Keep a sufficient distance from the forklift truck
and watch its speed. Vehicles with combustion engines also produce toxic exhaust gases.
Wear a breathing mask if necessary.
It is essential that the machine is level! Check with spirit level!
Dispose of the packaging material in an environmentally friendly way!
Do not use nitro thinner for cleaning. Painted surfaces of the machine can be damaged.
Fire hazard! Do not smoke and do not light an open fire.
D
C
E
F
