www.WoodMaxx.com
14
Assembly Instructions
(continued)
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
Inside mount
(washer, lock nut)
Outside mount (bolt,
fender washer)
View of proper assembly of in-feed bin
using 2 hole straps. All other bolts are
typically assembled as follows; bolt-
washer-panel-washer-lock-nut
Use Fender
Washers Here
• Attach the left panel of the in-feed bin
using two of the 2-hole straps and two
M10x25mm bolts. Straps will bend when
tightened down. This panel can be
identified by the two small holes on the
bottom of the panel where the fasteners
for the support leg attach.
• Attach the right side panel in the same
manor.
• Attach the bottom panel of the in-feed
bin, by first inserting the two M10x25
bolts through the side panels in the two
holes closest to the feed roller. Do not
tighten these bolts yet, and allow the
panel to hang vertically.
STEP 7
STEP 8
STEP 9
Summary of Contents for WM-8M
Page 1: ......
Page 58: ...3 20...
