www.WoodMaxx.com
12
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
Tools you will need:
• 13mm Wrench
(same as 1/2")
• 16mm Wrench
(same as 5/8")
• Adjustable Wrench
Assembly Time - Approximately 2.5 Hours
•
Remove the plastic wrapping and/
or the cardboard from the crate and
inspect the chipper for any obvious
shipping damage.
• Remove and unwrap all the chipper
components that are packaged in the
crate.
• Remove the cardboard box from the
in-feed bin. This box contains the
user’s manual, hardware packet, extra
shear bolts, and any additional item
that you may have purchased such as
extra chipper knives.
• 3/16 Allen Wrench
• 6mm Allen Wrench
•
Open the hardware packet and
organize the enclosed fasteners into
separate piles. There is a picture
of the hardware on page 11 of this
manual that you can use as a guide
to ensure that you use the correct
hardware in the upcoming steps.
• Remove the four bolts that secure the
top of the crate frame. Remove the
top of the crate, and set it aside.
• Located on the bottom of the crate is
a cross bar that secures the chipper to
the frame. Loosen the two bolts that
hold this bar in place, and drive the
bar forward with a dead blow hammer.
STEP 1
STEP 2
Summary of Contents for WM-8M
Page 1: ......
Page 58: ...3 20...
