www.WoodMaxx.com
15
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
Assembly Instructions
(continued)
• Raise the bottom panel in place and
insert the two M10x25 bolts the side
panel in the two holes closest to the end
of the panel.
• Install the remaining four M10x25 bolts in
the remaining four holes in the lower panel.
STEP 10
STEP 11
STEP 12
• Before tightening the bolts, ensure that
the lower panel is slightly higher than
the in-feed bin. This will prevent material
from hanging up where the two pieces
join together.
• Attach the top panel of the in-feed bin
by installing the four M10x25mm bolts in
the two forward holes of the panel. Affix
the safety bar stop to the top left of the
in-feed bin.
NOTE
Although we choose to
install the hardware with
the bolts pointing into the
infeed bin, it is acceptable to
point them outward to avoid
the possibility of branches
catching on the bolts.
Summary of Contents for WM-8M
Page 1: ......
Page 58: ...3 20...
