Post Sleeve Bushing Replacement
Most Sawmill Models
PSBR-MY2020-EN: Rev A
Page
of
13
16
29-Jul-2020
O n c e t h e b u s h i n g s a r e
nested together and loosely
assembled to the carriage
post, ensure they are pushed
flush against the front & rear
faces of the post so there is
no gap visible on either
bushing.
The bushing “fingers” naturally
push inwards so as they wear,
continuous pressure is applied to
each side of the carriage post.
However, the front & rear wear
pads on the bushings do not self-
adjust. As a gap appears over
time due to wear, simply loosen
two (2) bolts on one side and
push the bushing towards the
post until they are flush again.
The bushing holes are slotted to
allow for this future adjustment.
No
Gap
Gap
No
Gap
Gap
HM122
HM126
HM130
HM130MAX
“Fingers”
Wear Pad
Wear Pad
“Fingers”
