Post Sleeve Bushing Replacement
Most Sawmill Models
With the blade under tension, place a spirit level on the blade to check the level.
Fully extend the guide arm and set the level on top of the arm. Rotate the ABG carriage and
guide arm until it matches the blade level so both are parallel. Slide the guide arm in-and-out to
verify that the gaps between the guide blocks and the blade are uniform.
Once the ABG is properly adjusted, fully tighten the four (4) button head screws on the carriage.
PSBR-MY2020-EN: Rev A
Page
of
16
16
29-Jul-2020
ABG will rotate about
this button head screw
