Post Sleeve Bushing Replacement
Most Sawmill Models
REMOVE BLADE GUARD—HM122
On 2020 and newer HM122 sawmills with an optional ABG, remove the yellow blade guard by
unthreading the knob in the front.
Pull the guard out until the large hole at the end of the slot on the back of the guard aligns with
the screw and nylon washers. Tilt the guard under the blade and remove it from the sawmill.
PSBR-MY2020-EN: Rev A
Page of
5
16
29-Jul-2020
Align hole in end
of slot with screw
