Debarker Installation
Debarker Installation
2
2-3
DB17doc072219
Debarker Installation
3.
Assemble the debarker cutting head to the mount plate on the frame.
Use the four provided bolts and split lock washers to mount the cutting head to the
debarker frame. Use the lower set of four holes in the head mounting plate. The upper set
of holes are provided in the event the cutting head needs to be adjusted further down
than the slotted motor mount holes will allow.
See Figure 2-2.
FIG. 2-2
LX0042-2
5/16-18 x 3/4"
Hex Head Bolts (4)
5/16" Lock Washers (4)
Cutting Head