Alignment
Blade Wheel Alignment
Alignment
15doc091818
6-8
6
9.
Check the position of the blade on the idle-side blade wheel.
See Figure 6-5.
The horizontal tilt of the blade wheel should be adjusted so that the gullet
of an 1-1/4" blade is 1/8" (3 mm) out from the front edge of the wheel (±1/32 [0.75 mm]).
See Figure 6-6.
Use the cant control adjustment to adjust the idle-side blade wheel. If the
blade is too far forward on the wheel, turn the cant control counterclockwise. If it is too far
back on the wheel, turn the cant control clockwise.
10.
Check the position of the blade on the drive-side blade wheel. The blade should be posi-
tioned on the wheel as described for the idle-side blade wheel. Adjust the drive-side blade
FIG. 6-5
FIG. 6-6
150060
1 1/4"
Blade
± 1 mm (3/64”)
3.0 mm (1/8”)
Cant Control
