Specifications
Sawdust Exhaust System Specifications
6
6-3
EGdoc020420
Specifications
See Table 6-4
Other specifications of the EG100 edger related to the sawing process are given below.
TABLE 6-4
6.3
Sawdust Exhaust System Specifications
See Table 6-5
See the table below for specifications of a sawdust exhaust system that can be used
with the EG100 edger
1
.
3. The total value of hand-arm vibration the operator may be exposed to does not exceed 2.5 m/s
2
. The highest
root mean square value of weighted acceleration to which the whole operator’s body is subjected does not exceed
0.5 m/s
2
.
Number of blades
2
Blade diameter
250 mm (9.8”)
Rotational speed
4720 r.p.m.
Cutting speed (non-adjustable feed)
9 m/min
(29.5 ft/min)
Cutting speed (adjustable feed)
7 - 15 m/min
(23 - 49 ft/min)
Minimum board length
1100 mm (44”)
Minimum board thickness
10 mm (3/8”)
Maximum board thickness
50 mm (2”)
Minimum cutting width
40 mm (1 3/4”)
Maximum cutting width
300 mm (12”)
Maximum material width
520 mm (20 1/2”)
Airflow
1200 m
3
/h
Inlet diameter
150 mm
Motor power
1.5 kW
Number of sacks
2 pcs
Sack capacity
0.25 m
3
Pressure drop
1.5 kPa (0.22 psi)
1
1
The pressure drop between the inlet of the capture device and
the connection to the CADES should not exceed 1.5 kPa
(for the nominal air flow rate). If the pressure drop exceeds
1.5 kPa the machine might not be compatible with conventional
CADES.
Weight
110 kg
Recommended conveying air
velocity in the duct
20 m/s
1.
External chip and dust extraction equipment with fixed installations are dealt with in
EN12779:2016-04.
