Wood-mizer EG100EH11S, User Manual

Page: 72 / 82

Maintenance and Alignment
Checking the Rollers and Table Belt
5
5-11 EGdoc020420 Maintenance and Alignment
11. Mount all the components dismounted earlier in reverse order (reducer and movable blade bushings,
pulleys). Be sure to reinstall the keys (A).
12. Tension the belts properly -
See Section 5.2
.
5.6 Checking the Rollers and Table Belt
1. Check the hold-down rollers every 8 hours of operation. Remove any dirt or debris from the rollers.
Make sure they spin freely, without much play.
2. Check the table belt every 8 hours of operation. Clean any debris from the belt.
5.7 Lubrication
1. Remove any debris from the blade drive shaft every 8 hours of operation. Use a soft cloth to apply
a dry graphite daily to ensure resistance-free motion and to prevent surface corrosion.
2. Lubricate the blade shaft bearings every 200 hours of operation with one to two pumps of
lithium-based grease such as Shell Alvania No. 3. Do not overgrease.
3. Apply an anti-seize lubricant to the surfaces and threads of the blade mounting elements every blade
change (
See Section 5.1
).
FIG. 5-13
8
8
8
200
A/R