SAFETY
Dispose of Sawing By-Products Properly
Safety
EGdoc020420
2-3
2
DANGER!
Maintain a clean and clear path for all necessary movement
around the edger and lumber stacking areas. Failure to do so may
result in serious injury.
Dispose of Sawing By-Products Properly
IMPORTANT!
Always properly dispose of all sawing by-products,
including sawdust and other debris.
CAUTION!
The edger’s work-stand should be equipped with a 4 kg
or bigger dry powder extinguisher.
Check Edger Before Operation
DANGER!
Make sure all guards and covers are in place and secured
before operating the edger. Failure to do so may result in serious injury.
DANGER!
If your sawmill is equipped with a gas engine, make sure
there are not any fuel leaks before operating the machine as well as
during operation. Failure to do so may result in serious injury.
WARNING!
Always shut off the motor to stop the blade whenever the
edger is not in use. Failure to do so may result in serious injury.
WARNING!
Do not for any reason adjust the motor drive belts with the
motor running. Doing so may result in serious injury.
WARNING!
Always ensure that there are sharp points on the
anti-kickback fingers before each use of the edger.
Be sure the anti-kickback fingers are free from obstruction and are in
their downward position with the lever released. Failure to do so may
result in serious injury.
Keep Persons Away
DANGER!
Keep all persons out of the path of moving equipment and
boards when operating the edger. Failure to do so may result in serious
injury.
Keep Hands Away
!
