WolfPack HDTVBYOD8200, User Manual

Page: 17 / 24

13
Example 2: Multiview mode
1111@WMS42S W-123
MIRACAST1 MIRACAST1
AIRPLAY1
HDMI1
Video source name
Access code Device name
of the switcher
WiFi password
of the switcher
IP address
of the switcher
WiFi Pwd:12345678
IP: 192.168.1.8
HDMI2
Note:
• When the switcher outputs Guide Screen picture, the OSD will display all the time.
• When the switcher outputs specific video sources, the OSD will display on the display
device ’ s screen for 10 seconds and then disappear.
• By default, the access code is set as blank, therefore the OSD doesn ’ t display the access
code. If you want to set access code, please refer to Access Code section for more
information.
8.
Web UI
The Web UI provides basic controls and advanced settings. It can be accessed through a
modern browser, e.g. Chrome, Safari, Firefox, IE10+, etc.
By default, the switcher comes with a default IP address
192.168.1.8 . Subnet mask is
255.255.255.0 .
To get access to Web UI:
1. Connect your PC and the LAN port of the switcher to a local area network.
2. Set your PC to the same network segment as the switcher, e.g. 192.168.1.xxx.
3. Input the switcher ’ s IP address in the browser and press Enter and the following window will
pop up.