17
UI Element Description
If it
’
s set to 0 minute, it means this function is disabled, you cannot set the
display to standby mode.
By default, auto standby is set as
1 minute
.
Apply
Click to perform current settings.
Sink Power Management
UI Element
Description
Sink Power
Management
Set display to enter standby mode or to return to their normal working state
through CEC capability or RS232 commands.
Sink Power
Mode
both
: Enable both CEC and RS232 mode to manage the sink power.
cec
: Enable CEC to manage the sink power.
rs232
: Enable RS232 to manage the sink power.
By default, it's set as
both
.
Interval
between two
consecutive
commands
to the sink
(Second)
Specify a time interval between sending two consecutive commands to the
sink (in seconds). The interval should not be less than 0s.
Note:
If you
’
re not clear about this function, it
’
s suggested that you make no
changes here or contact with the manufacturer.
By default, the interval is set as
8
seconds.
RS232
Parameter
Set the RS232 parameters for the controlled display. For more information
about the parameters, see the user guide of your display devices.
Parameter
Value
Abbreviation
Baud Rate
9600bps
9600
Data Bits
8bits
8
Parity
None
n
Stop Bits
1
1
By default, its set as
9600-8n1
.
RS232
standby
command
Enter the RS232 standby command of a controlled display device. For more
information about the command, see the user guide of your display devices.
If you want to disable this function, you can enter nothing here.
By default, it
’
s set as blank.
RS232
wakeup
command
Enter the RS232 wakeup command of a controlled display device. For more
information about the command, see the user guide of your display devices.
If you want to disable this function, you can enter nothing here.
By default, it
’
s set as blank.
RS232 hex
string
enable
Enable
: select to use the hex numbers of RS232 standby and wakeup
commands to control your display devices. If this is the case, make sure
standby and wakeup commands are manually converted to their
equivalent hex representations first and then input in
RS232 standby
command
and
RS232 wakeup command
.
For example, RS232 wake up command in hex may be:
50 57 52 20 4F 4E 0D 0A
.
