12
• Manual switching:
1) Short press the source selection button on front panel until no active video sources are
displayed.
2) Send API command through telnet to the switcher to show the Guide Screen. For more
information, please see the separate API documentation.
Note:
• This Guide Screen picture can be changed though Web GUI setting, please refer to section
for more information.
• By default, if Guide Screen picture is being output for 60 seconds, a countdown timer with
the time period of 60 seconds will appear on the Guide Screen. When the timer ticks to zero,
if the connected display is CEC-supported or correctly set with RS232 control commands, it
will enter standby mode.
OSD
The switcher supports OSD (On Screen Display) to convey device basic information, including
video source
’
s information, access code, device name and IP address, etc. Here are two
different OSD examples in different scenarios.
Example 1: Full screen mode
WiFi Pwd:12345678
IP: 192.168.1.8
1111@WMS42S W-123
HDMI1
Video source name
Access code
Device name
of the switcher
WiFi password
of the switcher
IP address
of the switcher
