27
3062165_201508
Roof integration - Slate roof
1. Push in the intermediate panels as per diagram. If this should foul during
the installation, correct the collector position. Then bend the tabs at the top
of the intermediate panels to prevent them from sliding through.
2. Tighten all screws and nuts to secure the collector.
3. Fully peel back the protective foil from the flashing tape and affix the flashing
tape to the tiles. Create an upstanding fold at the ends of the flashing tape
bases on the left and right (see Fig.).
Installation of the
intermediate panels
Tabs
Intermediate panel
Intermediate panels
Flashing tape
Fold
Create a fold
15-60°
Summary of Contents for TopSon F3-1
Page 51: ...51 3062165_201508 Notes...
