Wodaplug.com OLT CLI User Manual
www.wodaplug.com
9
<key1 + key2>
Press the keys concurrently. For example,
<Ctrl+Alt+A> means the three keys should be
pressed concurrently.
<key1, key2>
Press the keys in turn. For example, <Alt, A> means
the two keys should be pressed in turn.
Eye-catching symbols are also used in the manual to highlight the points worthy of
special attention during the operation. They are defined as follow:
Caution: Means reader be extremely careful. Improper operation may cause
data loss or damage to equipment
Warning: Means reader be extremely careful. Improper operation may cause
bodily injury.
Note: Means a complementary description.
4. Hints Commands in this mannual is case sensitive.
3.2.
Typical Parameter Category
When configure the system with CLI(command lines) ,we will meet with some data types with
fixed format ,which embody some index’s meaning ,expression mode and value range.
Herein,we list some repeated commands to explain their meaning and use.
vlanid
Vlan index with valid integer value from 1 to 4094 .
port
Port number including gigabitethernet ports from 1 to 6, short for ge1
to ge6 .
To mention that ge5 to ge6 can’t be seen, corresponding
with 2 PON ports .We can say that ge5~ge6 is for PON1-PON2
configuration. While ge1~ge4 is for switch control modul’s 4 uplink
port configuration.
portlist
Port list such as “ge1,ge5”( 2 ports) ,”ge1-ge5”(meaning 5 ports
from ge1 to ge5.)
ifx-name
Ip port name includes inband and outband.inband interfaces is
