Wodaplug.com OLT CLI User Manual
www.wodaplug.com
54
100m: 100mbps
1g: 1gbmp(1000mbps)
10g: 10gbps
Auto: auto-negotiation
4.3.9.
System Configuration Mode
Command
Grammar
epon#
system
Function
Enter EPON system’s management mode
【
Example
】
1.Enter system management mode
epon#system
epon(sys)#
epon(sys)# ?
input “
？
”or “help” to show current directory
cfg-sync - synchronize onu config with its config file
console
- configure console parameters
onu-auth - configure ONU authentication parameters
read-comm
- set snmp read community string
reboot - reboot the system
restore
- restore to saved configuration
save - save system configuration
trap-addr - set trap destination IP address
write-comm - set snmp write community string
4.3.10.
Synchrony with ONU Configuration
Command
Grammar
epon(sys)#
cfg-sync
<slot>
<status
>
Function
Configure OLT’s setting is synchronous with ONU configuration. When
this function is enabled , ONU will remove its own nvs automatically
before ONU authorized to OLT .All configuration under the ONU will
be cleared .All ONU’s configuration is valid after authorized under the
OLT .
<slot>
PON card slot with integer value from 1 to 4 .
