Wodaplug.com OLT CLI User Manual
www.wodaplug.com
52
4.3.5.7.Disable Port Protocol Vlan Function
4.3.8.11.
Set Port’s PVID
Command
Grammar
epon(ge1)#
pvid
<pvid>
Function
Configure switch control module port’s default vlan ID .
<pvid>
Vale range from 0 to 4094
4.3.8.12.
Configure Port’s Rate Limits
4.3.8.13.
Configure Port’s Reauto-Negotiation Function
Command
Grammar
epon(ge1)#
reautoneg
Function
Configure switch control module port’s auto-negotiation function,
which is needed on the purpose of networking debugging. This
function could be replaced by means of plug in and out of the
cable ,but if the cable/fiber is too complicated or too far ,it is better
to realize it via software .Therefore ,port configuration management
module must provide a command port for reauto-negotiation
command ,which doesn’t preserve the attributed value continually.
4.3.8.14.
Show Port Information
Command
Grammar
epon(ge1)#
show
Function
Show switch control module port’s configuration information
【
Example
】
1.Show switch control module port 1 ‘s configuration information
epon(ge1)#show
------------------ PortId 2 Attribution --------------------
Auto-Negotiation:enable AdminStatus :enable
