Wodaplug.com OLT CLI User Manual
www.wodaplug.com
60
4.3.10.8.
Save Current Configuration
Command
Grammar
epon(sys)#
save
<device> <slot> <olt> <onu>
Function
Save current configuration.
Just input “ save “ command to save the switch control module’s
current configuration .
<device>
Appoint the device to save current configuration with valid index :
ctrl-card: save switch control module’s current configuration
<slot><olt> <onu>
is ignored
pon-card: save appointed PON card under
<slot>
configuration
<olt> <onu>
is ignored.
onu :save configuration for appointed onu with index :
<slot> <olt> <onu>
all: save system’s all default configuration and command
<slot><olt>
<onu> is ignored .
<slot>
Appoint PON card slot number with valid value from 1 to 4 .
<olt>
Appoint PON port number with valid value from 1 to 2 .
<onu>
Appoint ONU number with valid value from 1 to 64 .
4.3.10.9.
Set Trap Receiving IP Address
Command
Grammar
epon(sys)#
trap-addr
<index> <ip-addr>
Function
Configure EPON’s receiving trap IP address with 4 IP at most.
<index>
Trap receiving IP index with valid value from 1 to 4 .
<ip-addr>
Set trap receiving IP address ,such as 192.168.0.1.
4.3.10.10.
Set SNMP Written Community
Command
Grammar
epon(sys)#
write-comm <
community
>
