WMF 800 User Manual Download Page 52

Page: 52 / 72

Messages and Tips

Messages and Tips

Operating messages

Empty coffee grounds container

empty grounds cont.

The coffee grounds container is full

Remove the coffee grounds container, empty it and

rinse it with water
Wipe the coffee grounds container dry

Replace the coffee grounds container

Confirm with the P button

Always have the coffee machine turned on when
changing the coffee grounds container, so that the
electronic counter registers the fact that it was emptied.

beverage sel. locked

grounds cont.missing

Refill water tank

beverage sel. locked

refill water tank

The water tank is nearly empty

The water tank will not be completely emptied, in order
to prevent air from entering the coffee system.

Lift the water tank slightly and remove it

Empty the remaining water

Fill the water tank with cold tap water

Water can then be added, with the lid in place.

Place the lid on the water tank

The lid must be on the tank when it is put in place.

Slowly slide the water tank back into the machine

beverage sel. locked

water cont. missing

Water tank lid is missing

tank lid missing?

The lid is not in place, or is incorrectly seated?

Place the lid on the water tank

The machine is not ready to operate without the cover

Summary of Contents for 800









































































Search results

Summary of Contents for 800

Reviews:

Related manuals for 800

Brands by name

Popular brands

WMF 800, User Manual

Search results

Summary of Contents for 800

Reviews:

Related manuals for 800

Brands by name

Popular brands