WMF 800, User Manual

Page: 42 / 72

42
Care
The remaining descaling solution must be emptied from the tank so that the coffee machine
can then be rinsed with clear water and no descaling solution remains in the coffee machine.
Confirm with the P button
>
>
Fill the water tank with cold tap water
Place the lid on the water tank
>
The lid must be on the tank when it is put in place.
Slowly slide the water tank back into the machine
>
Press the P button to continue descaling
>
Replace the filter cartridge
>
Thoroughly clean the red milk nozzle security seal
>
Replace the red security seal on the milk nozzle
>
[4] [5] [6]
Check that the security seal is properly seated
>
Insert the milk foamer
>
>
Fill up the water tank and replace it
The machine now heats up. Steam and condensed water will escape during this process.
The water hardness, the water flow and whether a tank filter is used determine the schedule
for descaling. This time is calculated by the WMF 800, and a request for descaling appears.
Descaling can be delayed by pressing the C button; however, it must be carried out within
the next 50 brew cycles. Otherwise, beverage dispensing will be blocked. The blocking will be
cleared after a descaling.
refill water tank
OK: P
Change water filter
Start-up program
see page 13
For initial use of a water filter
“Start-up” > “Insert water filter”
see page 8
and
“Start-up” > “Basic settings”
see page 13
descaling ...
time remain: 1 min.
4 5 6
Care program without request see page 36
Immediately following descaling, you will
be prompted to clean the machine.
Cleaning the machine - Cleaning program,
see page 38.