WMF 800 User Manual Download Page 58

Page: 58 / 72

Messages and Tips

Water tank is difficult to
remove

Lightly smear O-rings on water spout supports with WMF gasket grease

Brewing unit is difficult
to remove and replace

Lightly the smear O-rings on the brewer with WMF gasket grease

Pump makes loud noises

See also Flow Error.

Water tank is not inserted correctly (air in the system).

Push in water tank completely

Bleed machine:

Dispense hot water until a constant stream of water comes out

Hint: it is normal if the water pump runs independently from time to time
during operation; it fills the system automatically.

Coffee has no crème

•

Unsuitable coffee mixture or coffee is not fresh
Quantity of ground coffee is set too low

•

Cups too cold: pre-warm

•

Grinding degree too coarse: Set grinding degree finer

•

Carry out warm-up rinse

•

Brewing unit can no
longer be pulled out or
inserted

Brewing unit is not in the basic position

The brewing unit can be adjusted using the multitool until the brewer

can be inserted
Remove coffee grounds residue from the inside of the brewer

Noticeably large amount
and very coarse ground
coffee in brewer area

Check grinding degree setting and set finer if necessary

Check whether the metal spring ring is missing from the brewer plunger:

Remove the brewer and open it completely by turning it clockwise

The brewer plunger on the bottom of the brewer is now visible.

Install the metal ring

Grease O-rings
see page 59

Brewing temperature
see Settings > Basic settings
see page 30
Settings > Grinding degree setting
see page 33

Summary of Contents for 800









































































Search results

Summary of Contents for 800

Reviews:

Related manuals for 800

Brands by name

Popular brands

WMF 800, User Manual

Search results

Summary of Contents for 800

Reviews:

Related manuals for 800

Brands by name

Popular brands