WMF 800, User Manual

Page: 40 / 72

40
Care
Replace water filter
Confirm with the P button
>
Remove the old filter
>
Insert a new filter
>
Fill the water tank with cold tap water
>
>
Place the lid on the water tank
The lid must be on the tank when it is put in place.
Slowly slide the water tank back into the machine
>
After it is changed out, confirm by pressing the P button
>
Place a 3 litre container under the hot water spout
>
Start the filter rinse with the P button
>
When rinsing the filter, you will hear unusual noises. This is normal. The noises will end during the filter
rinse. During further operation, everything will sound normal again.
After the rinse, the ready to operate display appears.
Depending on the water hardness and the water flow, but after 3 months at the latest, the
request appears to change the water filter.
The filter change can be delayed by pressing the C button.
filter exchange
OK: P browse: -/+
remove water tank
remove old filter
place new filter
Call up care program
see page 36.
Remove milk foamer
see Cleaning the milk system
page 43
Change water filter
Start-up program
see page 13
For initial use of a water filter
“Start-up” > “Insert water filter”
see page 8
and
“Start-up” > “Basic settings”
see page 13
filter rinsing
place 3L container
under h.w. spout
rinsing filter ...
time remain.: 4 min.
Use the filter change for a thorough tank
cleaning.
Cleaning the water tank
see page 47.
your selection pls
08:15 25.08.2008