WMF 5500 Series User Manual Download Page 64

Page: 64 / 96

User Manual WMF espresso

Care | Manual cleaning

6.4.3 Clean the brewing goup manually

Use the brewing group brush to loosen the coffee
grounds residue in the distributor sieve and on the
seal

Start the rinsing cycle for the distributor sieve

6.4.4 Clean the portafilters

Burn hazard

• The portafilters and the brewing sieves

become very hot during beverage dispensing
and during cleaning.

> Do not touch the portafilters or the brewing

sieves immediately after dispensing or after
“Brewing group cleaning”.

All individual components of the portafilter, that is,
the portafilter itself, the handle, the brewing sieve,
the sieve retaining ring, and the insulation insert are
dishwasher safe.

Daily cleaning

Remove the portafilter and the sieves

Rinse off all parts with clear, warm drinking water

Weekly cleaning

Place the portafilter in a container and clean it weekly.

Place a cleaning tablet in the container

Fill the container with hot water and dissolve the
cleaning tablet

Remove the brewing sieve and the sieve retaining
ring

Rinse the distributor sieve

Operation

page 27

CAUTION

Summary of Contents for 5500 Series

































































































Search results

Summary of Contents for 5500 Series

Reviews:

Related manuals for 5500 Series

Brands by name

Popular brands

WMF 5500 Series, User Manual

Search results

Summary of Contents for 5500 Series

Reviews:

Related manuals for 5500 Series

Brands by name

Popular brands