15
User Manual WMF espresso
Safety
Installation location
• The machine must be set up so as to allow good visual access.
• The device must be placed and leveled on a horizontal, sturdy,
water-resistant, and heatproof base.
• The device must not be cleaned using a water jet. The device
must be installed where it is protected against water spray.
• The device must not be located on a surface that is sprayed or
cleaned with a water hose, steam jets, steam cleaner, or similar
devices.
Water supply
• TW15 (DN 15 at least DN 6 or 1/4") hose connector with
main shutoff valve and contaminant filter, with a mesh size
of 0.08 mm, by customers on-site. At least 0.05 MPa (0.5 bar)
supply pressure at 2 l/min (low pressure). At least 0.30 MPa
(3.0 bar) supply pressure at 2 l/min (standard).
Maximum 0.6 MPa (6 bar). Maximum inlet temperature 35 °C.
• The set of hoses provided with the new coffee machine and/or
the new water filter must be used. Do not use the old set of
hoses.
Ambient temperature
• Ambient tempe5 °C to a maximum of +35 °C
