62
User Manual WMF espresso
Care | Cleaning programs
Without switch-off
after cleaning
Touch
Yes
Without Switch-off
after cleaning
Touch
No
Remove the portafilters
Remove the brewing sieves from the portafilters
Insert the blind sieves in the portafilters
Place one WMF special cleaning tablet in each
portafilter
Instructions:
Do not add any water.
Insert the portafilters
Press
to confirm and continue
If not enough hot water was discharged via the boiler,
hot water will flow out of the hot water outlet during
cleaning cycle.
The question of whether the cleaning tablets have
been inserted appears.
Press
to confirm and continue
Cleaning begins. A bar graph and the remaining time
are displayed.
After about 7 minutes, an animation sequence
indicates that the portafilters should be removed and
the sieves changed out.
Remove the portafilters
Remove the blind sieves
Do not insert the portafilters yet. The distributor sieve
is rinsed next.
Press
to confirm and continue
A request to clean the portafilters and the sieves
manually is shown.
Press
to confirm and continue
If
Yes
was selected, for switching off after cleaning,
then the machine switches off now.
If
No
was selected, for cleaning without switching
off, the coffee machine heats up again.
The coffee machine is now “Ready to operate” again.
6.3.2 Distributor sieve rinsing
w
Operation
w
Rinse the distributor sieve, page 27
The program always cleans both
brewing groups at the same time,
even if only one has been in use. If
one brewing group has not been in
use, then there is no need to place
a cleaning tablet in that portafilter.
However, the blind sieve must be
placed in both portafilters.
8:03
DI_Ral_12
Clean the portafilters and sieves
manually.
w
Clean the portafilters
Clean the distributor sieve manually
w
Clean the portafilters
