5.3.4 Alternate Event
View the alternate event page by pressing [ENCODER 2]. The STEP DISPLAY will
now show triggers, bursts, and gates. These events can only be placed on steps
that already have a probability assigned to them. These steps will be lit brightly.
Combining Group Probability, Alternate Event, and Bursts/
Gates can create dynamic patterns with structured variation.
5.4
TRIPLET
Metron’s engine allows the user to freely mix triggers contained on a triplet
grid and standard grid at quarter note resolution. When a quarter note is set
to triplet, only the first 3 steps in that quarter note will be lit. The fourth step
can contain data, but it will be ignored during playback. Set a quarter note to
triplet by accessing Triplet Mode and pressing the corresponding [MATRIX]
button. Triplet can also be enabled for an entire track or variation by pressing
the corresponding button while holding [TRIPLET].
Probability Amounts:
10%
25%
50%
75%
Group A
Group B
Group C
Group D
Alternate Events
Trigger
2 Burst
3 Burst
4 Burst
15% Gate
25% Gate
50% Gate
75% Gate
100% Gate
29
5. ADVANCED SEQUENCING
5.5
PER-TRACK SHUFFLE
Metron offers the ability to shuffle clock on a per-track basis. These settings
are saved within the session.
You can push every other step on a track back in time by up to 15 microsteps
by holding the corresponding [TRACK SELECT] and turning Encoder 1. The
offset will be displayed in microsteps on the step display.
Hold [CLEAR] and press [TEMPO] to set all tracks back to no shuffle.
Per-track shuffle is applied after any shuffle coming from
an internal/external clock source. Per-track shuffle cannot
be applied to Triplet notes.
!
Summary of Contents for Metron
