-
NTP time server IP address
and
NTP time server port
–
to synchronize datetime
from a server with the WM-I3 device
-
LED operation time
- it is possible to specify how long the LEDs will continue to
operate in the case of the first setting, test, when you connect the battery. It can
help you test the settings, cabling (data reception), and data transmission. We
don
’
t recommend to set too long interval, because a long interval of LED operation
would unnecessarily exhaust the battery of the device.
Set the desired parameters and press the
OK
button.
3.9 Alarm meter settings
You should configure the meter compatible settings and
MIN
,
MAX
limits for the pulse
input (of the connected meter), which you will found in the
Alarm meter settings
parameter group.
