The following Parameter groups are listed here:
•
Alarm meter settings
–
compatibility settings, pulse input
’
s limits to report
as alarm (low and max amount, etc.)
•
Alarm report settings
–
alarm triggered event types (battery voltage, cover
removal detection, digital input events)
•
Cellular network settings
–
APN, SIM PIN, Narrow Band network settings
•
Data sending settings
–
Data sending and local storage parameters, NTP
time server settings
•
LwM2M settings
–
Leshan and LwM2M protocol compatible settings
•
MBUS settings
–
for MBus capable meter compatibility
•
MQTT settings
–
MQTT protocol related settings
•
Status information
3.
Configure the parameters as you want, and push to the
OK
button. Then select
another
Parameter group
, push to its
Edit values
and configure the parameters.
Repeat this until you will finish the configuration.
4.
You can save the settings at the
File
/
Save
menu (into a .CFG extension file). You
can also load
a configuration file from the
File
/
Load
menu.
5.
The WM-I3 also has default parameters.
You can download a Sample MQTT, LwM2M and TCP compatible WM-I3
configuration file (must be extracted the compressed file and load the CFG file):
https://m2mserver.com/m2m-downloads/WM-I3_Sample_Config.zip
6.
When you
’ve
finished the parameter modifications, push to the
Parameters write
icon in the menu. Then the whole parameter list and the values will then be
sent to the WM-I3
®
. The right bottom progress indicator will show the status of the
process.
