2.10
Service features
The device has various
service features
which
can be controlled manually - just for the case
–
which can be initiated by
pushing
the
Reset
button (no. 11).
By any reason, if you need to
stop or start the device immediately or you cannot login into the
system, you can start or stop it manually here. It is useful when the device was misconfigured or
the installation process failed, IP address or the password was loosen.
Here we’ve
listed all Service features of the
Reset
button which can be selected by manually.
Push RESET Legend
LED / signal
2 sec
START the device
(when it was stopped
before, AND the device has power source)
the
ON
led will lighting (
green
)
6 sec
Power off / STOP the device
(if it was
operating)
all LEDs
will inactive, only the
PWR
led is active (
green
)
4 sec
SERVICE MODE MENU of the device
(if
the device is operating)
–
the menu is active
for 1 minute
the
KERNEL
led will lighting by
red
,
while the service mode is active
The device
Service menu
has 4 modes (the
menu is
active for 1 minute only
, while you can
be select a mode from the menu by
pushing the Reset button until 1sec)
.
The following modes can be selected from the menu, here:
-
MENU ITEM 0 (no short push)
–
reboot
-
MENU ITEM 1 (1x short push)
–
restoring the default configuration
-
MENU ITEM 2 (2x short push)
–
restoring the factory configuration
