e.)
When the connectivity LEDs are not blinking anymore the load of the system has finished.
f.)
If the
WAN
(APN) interface was not configured yet, the
SIGNAL LEVEL
low LED is blinking
which means the data concentrator tries to connect to the wireless network. If it will was
configured properly (APN, password and SIM PIN is matching) and the registration was
succesful, then the
WAN
led will be lighting and the current
SIGNAL LEVEL
leds will be
also lighting its signal strength value which means connected and you have useful wireless
signal reception for the usage and data transmitting.
g.)
If you have already connected the
USBLAN
or
LAN1
..
LAN4
or the
MBUS, RS485,
the
interface connectivity led will be also active and signing the network connection and data
traffic.
When the device has reached the listed point
„
e
.)”
then the device is already accessible on its
LAN
and
USBLAN
interfaces, therefore now you can login to the LuCi
®
web user interface (or connect
via SSH).