Here you will found some examples for the APN settings.
LTE450, LTE Cat.M and NB (Narrow Band) network usage requires compatible SIM card!
Ask your network service provider for the correct type of SIM card.
Automatic mode
When you not set any value
for the APN, the router will connect by the SIM-card automatically
to the next available network’s available APN
.
Authentication
The
PAP/CHAP username
and
PAP/CHAP
password
settings can be also configured here
–
if
it is required for the connection.
Click to the
Save & Apply
button for saving the settings, while the devices attempts then
connecting to the mobile network.
Once this is done, the router will no longer be constantly restarted!
After that, you should check the data traffic in the
Network / Interfaces
menu at the WAN
interface status.
As you can see, the device is already connected to the mobile internet network and is currently
active -
RX
(received data),
TX
(sent data) and
KB
(KBytes) are constantly increasing.
During the settings,
LED2
indicates the network registration process - if the APN and SIM settings
are correct, it flashes by
green
.
Attention!
The available APN settings will be provided by the SIM card provider mobile operator or your
mobile internet service provider.
