Current and consumption
•
Power voltage: 12..24 VDC
•
Current: 160-260mA, 12V DC
•
Consumption: 1.9
–
2.4W
2.
When starting the device
(at power on)
–
and in case of rebooting
–
all the three LEDs
of the router
will active for a few seconds.
LED1
LED2
LED3
3.
Then the
LED1
light is lighting continously by
green
, which signs that the system is during
loading (boot in progress).
LED1
LED2
LED3
4.
The system start requires about 1-2 minutes, while the device loads the necessary modules
or the operation and prepares the web configuration user interface
–
the
LED2
will sign it.
Then the web interface will be availble for login.
5.
Configure the device’s wireless interne
t module settings
(SIM and APN data on the
router web interface)
for the cellular internet connection
–
otherwise the router will be
restarting in ever 10 minutes.
6.
The modem registration to the cellular network is signed by the
LED3
flashing after the
settings. If it was succesful (to register the SIM card data to the network) then the
LED2
will lighting, which shows that the router can access the cellular network already.
LED1
LED2
LED3
9-24V DC power voltage input (interface nr. 1) should be used by the DC powering with
the microfit connection 12V DC power adapter, or you can use alternatively 9-24V DC
power voltage with own cabling (follow the pinout hints).
