6.4 Shutdown / halt of the router
To shutdown the router device, first you have to reboot by the
System / Reboot
menu. When all
the three LEDs blinks at once, the router is restarted and can be switched off safely as soon as you
can
–
pull out the power connector from the 230V AC electricity plug.
Attention! Never stops the router without requesting the reboot process, and do not
remove the power socket without restarting the router before this action!
6.5 Reset the router
When the router is not reacting or it was not possible to configure properly, push in the
Reset
titled
low-case button for 10 seconds
–
by a sharp and thin object. Then the router will be restarted by
the factory configuration, whereas the LED lights will assign it. After a few minutes, the router will
be available and accessible on its default address.
Configure the router in its web interface!
6.6 Password change
Open the
System /
Administration
menu.
At the
Router password
you can
fill the new
Password
and again to the
Confirm
password
fields. You will be able to login further by this new password.
When you enter the password, the web interface replaces the entered characters with *.
At least 6 characters must be entered for the password.
Press the
Save
button to save the new password.