UTP (Ethernet) cable:
Type: Cat5e UTP PVC
RS485 cable:
Type: 70 cm OMYA type, 3 x 0,75 mm^2, halogen-free, double insulated wire pair, up to min. 24V
DC breakdown voltage, colour signed cabling, blanked on the cable end
–
for
supporting the 24V DC power voltage.
Type: terminal block, 3 pins
Function: RS485 connection for external devices
Cabling must be done considering the next pinout (from left to right): GND, A, B
microUSB-USB configuration cable:
Type: USB-microUSB cable
Connection type: microUSB 2.0 B type connector
Function: for alternative USB-Ethernet connection, according to the RNDIS standard it is simulating
an Ethernet adapter for direct computer connection.
1.6 First start
The router is provided with pre-installed system (which contains the operating firmware and the
OpenWrt
®
system, which is accessable on the local website of the router).
1.
Connect the
microfit connection
power connector
(1) when the router begins its operation,
where the LED lights will be signing and inform you about the current status of the device.
