W5500S2E serial to Ethernet module
W5500S2E user manual
50
7.3
Advance Options
Figure below shows the advance settings page of WIZS2E module.
Figure 7-4 Advance Options page
Device Name:
The module name, the user could make its own definition, it could be any
characters. Maximum 15 bytes
Enable NETBIOS
: Check this box to activate this feature, default: disable; if activated,
the user could type the device name (case insensitive) in the browser to login to the
webserver of this module.
HTTP Port
: W5500S2E’s web server port number, default: 80; value range is 0 to 65535.
If the port wasn’t set to 80, then need to input the port at the end of the IP address. For
example: 192.168.1.88:8000.
Note: If W5500S2E works in TCP server mode, HTTP port must not be set to the same as
the local port of the module.
Data Packing Size (byte):
Data packaging length, default: 0 (disable), maximum size
is 2048 bytes.
Data Packing Time (ms):
Waiting interval of data packet, default: 0 (disable),
maximum value is 60,000.
