W5500S2E serial to Ethernet module
W5500S2E user manual
49
Socket Setting
Setting
Description
Default
Start mode
“AT Command Mode” or “Data pass-through mode”
“AT Command Mode”
Socket Type
“TCP Server”, “TCP Client” or “UDP mode”
“TCP Server”
Remote Host
Remote host IP address or domain name
192.168.1.99
Remote Port
Remote host port number
5000
Local Port
Local port number (0~65535; avoid used port)
5000
Bind Local Port
Only valid in TCP client mode
Disable (uncheck)
Modbus option
Setting
Description
Default
Enable Modbus Mode Enable Modbus Mode function
Disable
Select Modbus Mode
“Modbus RTU” or “Modbus ASCII”
“Modbus RTU”
UART Setting
Setting
Description
Default
Baud Rate
1200bps ~ 1,152,000bps
115,200
Data Bit
7 or 8 bits
8
Parity
NONE, ODD or EVEN
NONE
Stop Bit
1 or 2 bits
1
Flow Control
NONE or “CTS/RTS mode”
NONE
Save Settings
: Click to save all these settings
Reset
: Click to Restart (Need to click “Save Settings” to apply the setting)
