W5500S2E serial to Ethernet module
W5500S2E user manual
37
6.5.4
Management command
C1_SEND_NUM (Serial sent number of byte)
Command format
Parameters
Usage
AT+C1_SEND_NUM?
Nil
Read
Response
[C1_SEND_NUM] Value is:<value>\r\nOK\r\n
Display range: 0 ~ 4,294,967,295
。
Example
Command: AT+C1_SEND_NUM?\r\n
Response: [C1_SEND_NUM] Value is:2048\r\nOK\r\n
This command is valid for both “data pass-through mode” & “AT data transfer command mode”.
C1_RCV_NUM (Serial received number of byte)
Command format
Parameters
Usage
AT+C1_RCV_NUM?
Nil
Read
Response
Description
[C1_RCV_NUM] Value is:<value>\r\nOK\r\n
Display range: 0 ~ 4,294,967,295
。
Example
Command: AT+C1_RCV_NUM?\r\n
Response: [C1_RCV_NUM] Value is:2048\r\nOK\r\n
This command is valid for both “data pass-through mode” & “AT data transfer command mode”.
NETSEND (Network sent byte)
Command format
Parameters
Usage
AT+NETSEND?
Nil
Read
Response
[NETSEND] Value is:<value>\r\nOK\r\n
Display range: 0 ~ 4,294,967,295
。
Example
Command: AT+NETSEND?\r\n
Response: [NETSEND] Value is:2048\r\nOK\r\n
This command is valid for both “data pass-through mode” & “AT data transfer command mode”.
NETRCV (Network received byte)
Command format
Parameters
Usage
AT+NETRCV?
Nil
Read
Response
Description
[NETRCV] Value is:<value>\r\nOK\r\n
Display range: 0 ~ 4,294,967,295
。
Example
Command: AT+NETRCV?\r\n
Response: [NETRCV] Value is:2048\r\nOK\r\n
This command is valid for both “data pass-through mode” & “AT data transfer command mode”.
