W5500S2E serial to Ethernet module
W5500S2E user manual
53
8
Factory reset
If you forget the password of the module, the user could reset all setting of the module
back to factory default. There are three kinds of method to factory reset:
8.1
By ConfigTool
In the WIZS2E ConfigTool, first select the module which you need
to factory reset.
Please click “Reset” button and then click “Factory Reset” button to
factory reset the module back to default settings.
8.2
By using AT command
For details of AT command (default) to factory reset, please refer to the command
“DEFAULT” in chapter 6.5.1.
8.3
By hardware
Factory reset through evaluation board
Press the DEFAULT button for more than 3 seconds for factory reset.
Factory reset through module pin
Figure 8-1 through the module default PIN to restore factory settings
W5500S2E has a factory reset PIN. Pull down the DEFAULT pin for over 3 seconds to
activate factory reset when the module is power on.
W5500S2E-S1
W5500S2E-Z1
W5500S2E-R1
