W5500S2E serial to Ethernet module
W5500S2E user manual
31
DOMAIN (Remote host name)
Command format
Parameters
Usage
AT+DOMAIN?
Nil
Read
AT+DOMAIN=<parameter>
Remote host domain name
default:
www.iwiznet.cn
Maximum length is 32 bytes
Set
Response
[DOMAIN] Value is:<value>\r\nOK\r\n
Example
Command: AT+DOMAIN=www.iwiznet.cn\r\n
Response: [DOMAIN] Value is:www.iwiznet.cn\r\nOK\r\n
This command is only valid
In TCP client mode or UDP mode
“DNSEN” is enabled
This command sets the remote host server name.
RECONTIME (Reconnection interval)
Command format
Parameters
Usage
AT+RECONTIME?
Nil
Read
AT+RECONTIME=<parameter>
Range: 0~60000
Unit: ms
Set
Default: 0 (reconnect immediately)
Response
[RECONTIME] Value is:<value>\r\nOK\r\n
Example
Command: AT+RECONTIME=1000\r\n
Response: [RECONTIME] Value is:1000\r\nOK\r\n
This command is only valid in TCP client mode & “data pass-through mode”.
This command configures the reconnection interval of the TCP client after the module has disconnected
from a TCP server. Default value is 0 for reconnecting immediately.
NETBIOS (NetBIOS)
Command format
Parameters
Usage
AT+NETBIOS?
Nil
Read
AT+NETBIOS=<parameter>
0: Disable (Default)
1: Enable
Set
Response
[NETBIOS] Value is:<value>\r\nOK\r\n
Example
Command: AT+NETBIOS=1\r\n
Response: [NETBIOS] Value is:1\r\nOK\r\n
User can enter the URL
http://[Module name]
in the browser in the same LAN with the W5500S2E if this
command is enable.
