- 8 -
signal is turned on.
Note: operation method of the keys:
If not specifically stated, the keys shall be operated as follows
;
select the
directions (up/down/left/right) through "(3) direction key (left/top)" and "(9)
direction key (right/bottom), then click "(4) Confirm key" to confirm, or click "
(8) Return key " to go back.
4.3 Boot
Long click "(2) power button" to boot up; the device will be started up after
waiting for a few seconds.
Note: the first start-up of the equipment may take longer; after the first
time start-up and shutdown, the reboot in a short period of time will take less
time. After been shut down, cutting off the power and rebooting the device
shortly after will also shorten the boot time.
After been turned on, this device can be set in three kinds of default program as
follows:
(I)
After the boot, carry out the following operation on the screen: set up→
power-on application settings → default; the boot mode is set to the
default mode, as shown in the following figure:
After the boot, the device will enter into the main page, as shown in the following
figure: