AHD Speed Dome Camera Introduction Manual
27
▌▌
Auto Scan Setup
<Dome Camera Setup>
→
<Auto Scan>
Scan Speed [1~250]
Scan speed can be set.
“1” is the most slowest.
Scan Position
To select the tilt angle via joystick and
press “Open” to save.
Run Scan Run Auto Scan function.
▌▌
Alarm Input Setup
(For External mini PTZ Dome only)
<DOME CAMERA SETUP>
→
<ALARM SETUP>
Match the Alarm sensor input to one of Preset Positions
/Home/Auto Scan/Group/Pattern/Swing. If an external sensor
is activated, camera will correspond with command position
when this item is predefined.
Alarm No.
[001~004]
Select alarm channel number
Alarm x Action [NOTHING/PRESET/PATTERN/SWING/
GROUP]
Assign counteraction Preset position to each
Alarm input.
Release Time
[001~240S]
Alarm output time is postponed to a certain
time, adjustable range is 0 sec t 240 sec.
Start Heater [OPEN/CLOSE]
(AUTO SCAN)
SCAN SPEED : 001~255
(TILT POSITION)
(RUN AUTO SCAN)
BACK
EXIT
ALARM ENABLE :OPEN/CLOSE
ALARM NO. :001~007
ALARM ACT :NOTHING
RELEASE TIME :010S
START HEATER :OPEN/CLOSE
BACK
EXIT